BRIDGE AND BOSS JIG by Henry James

For Building, Repairing, and Upgrading Road and Mountain Bike Frames

Made in the USA by: Henry James Bicycles, Inc.

NEW!! UNIVERSAL AXLE MOUNT:

• Fits Forks and Rear Triangles
• Infinitely Adjustable Axle for Hub spacings from 100 to 145 mm
• Existing Industry Standard Spacings are: 100, 120, 126, 130, 135, 145 mm),
  and new spacings may appear
• You don't have to buy new Axles for special jobs
• The Axle is self-centering for foolproof alignments.

NOTE: If you buy a Henry James Universal or ACCESS Frame Jig, please specify that you want this jig is integrated into the Frame Jig. If you already have the B&B Jig, we can supply you with an adaptor.

FOR INSTALLING:

BRAKE BRIDGES
CHAIN STAY BRIDGES
CANTILEVER BRAKE BOSSES
MOUNTAIN BRAKE CABLE STOPS

CANTILEVER BRAKE BOSSES:

• Engraved scale determines correct height
• Thumb screws quickly lock the Jig setting
• Spacing range for both Road and Mountain cantilever brakes
• Bosses are keyed parallel, but otherwise move independently to allow
  the best fit against forks or stays.

BRAKE BRIDGES:

• Built-in scale determines correct height
• Thumb screws quickly lock the Jig setting
• 6 mm bolt supports and centers the bridge
• Two pins on a squaring block square up the bridge
• Jig allows you to quickly fit the bridge miters.

CHAIN STAY BRIDGES:

• The pins on the squaring block locate and square the bridge.

BRAKE CABLE STOPS:

• A pin at the top of the Jig centers the rear brake cable stop, if used.