69mm x 2" PF30 Bottom Bracket Shell by Paragon

BB-69PF30

Availability: Out of stock

$12.00
This bottom bracket shell is designed specifically for the SRAM PF30 bottom bracket. The outside is 2" OD x 69 mm wide, allowing 1 mm for finishing, and is relieved to 1.946". The inside diameter is supplied .5 mm undersized, to 45.5 mm (1.791"), and must be finished to width and size after fabrication by the frame builder. Machined from 4130 steel, it is relieved in the center for weight reduction to 47.24 mm (1.860"). Made in the USA by Paragon Machine Works.

69mm x 2" PF30 Bottom Bracket Shell by Paragon

Details

This bottom bracket shell is designed specifically for the SRAM PF30 bottom bracket. The outside is 2" OD x 69 mm wide, allowing 1 mm for finishing, and is relieved to 1.946". The inside diameter is supplied .5 mm undersized, to 45.5 mm (1.791"), and must be finished to width and size after fabrication by the frame builder. Machined from 4130 steel, it is relieved in the center for weight reduction to 47.24 mm (1.860").

Made in the USA by Paragon Machine Works.

Additional Information

Part Number BB-69PF30
Angles --
Tube Diameters --
Alloy Steel
Wt. in Grams 120 grams
Wt in Ounces 4.2 ounces